Four Polishing Processes Of 304 Stainless Steel Strip

Although the ordinary 304 stainless steel belt can be used as the basic material, it is not attractive to directly use it to produce products because of its lack of smoothness. After polishing, the steel strip can glow with different luster. The stainless steel bowls, pots and spoons we usually use are polished. With the development of polishing technology, the current polishing technology can make the stainless steel materials achieve a very high-definition mirror effect. The following are the four polishing processes of Xiaobian collection and finishing.

1、 Titanium processing

Generally, high-end decorative materials will use this polishing process, and the material surface will show a gorgeous effect after titanium processing. 304 series stainless steel has been used in titanium decoration for many years. It is generally used as elevator and building decoration materials.

Due to the excellent surface processing ability of the material itself and its high corrosion resistance, the material can be widely used in a variety of decorative materials. It can be said that in the surface decorative material industry, the material occupies a large share and is often the first choice of many customers.

2、 Oil grinding wire drawing

After oil grinding, the surface of the steel strip can reflect the almost perfect decorative effect. It is often used on decorative panels such as household appliances and electronic products. The cold-rolled steel strip can achieve very good results after sanding. At present, some manufacturers can provide oil-based sanding of hot-rolled steel strip in the market. After processing, the effect is similar to that of cold-rolled oil grinding.

There are two kinds of oily wire drawing, namely filament process and short wire process. Generally speaking, the filament process is generally selected for the elevator decorative panel, and both processes can be selected for a variety of small household appliances and kitchenware.

3、 Dry grinding and wire drawing

There are two kinds of dry grinding and wire drawing commonly used: long wire and short wire. After this processing technology, the surface of the steel strip will show a relatively good decorative effect, which can meet the requirements of ordinary decorative materials. Generally speaking, after one grinding, it can achieve better results.

Because the cost of this processing equipment is relatively low, the operation is relatively simple and the application is relatively wide, it has become a processing technology used by many manufacturers. According to the statistics of the existing steel strip processing technology in the market, 304 steel strip accounts for more than 80% of the frosted steel strip that can be used to process filaments and short filaments.

4、 8K processing

The advantages of 304 series steel strip in 8K processing are higher than that of 200 series steel strip. The surface of cold-rolled steel strip can achieve mirror effect after 8K grinding, and generally only one pass processing is required.

At present, 8K grinding process is processed with nitric acid and iron oxide red, so its price is relatively low. In addition, the cost of equipment is relatively low. Generally speaking, the process cost is relatively low, so it has been widely popularized and applied.

The four polishing processes of 304 stainless steel belt will be introduced here first. I believe you should know that the four polishing processes of steel belt are titanium processing, oil grinding and wire drawing, dry grinding and wire drawing and 8K processing. Have you mastered it after reading it?