Why is the price of 304 stainless steel belt different?

Many of us don't care about the price of 304 stainless steel strip, but for the steel strip manufacturers, dealers and purchasers, they pay great attention to the price per ton of steel strip. Why do we find that the price is the same as 304?

The first is calendering. We should know that this is different from the accurate thickness and rolling quality of the steel strip, because the production cost of rolling will be different because of the thickness of the steel strip. If the thickness of the steel strip is thinner, the production cost per ton of rolling will be higher, and the price will be higher. Of course, sometimes when the steel strip with special thickness is rolled, the cost can not be simply judged by the thickness of pressing.

The second is the rate of return. For steel strip manufacturers, they all hope to profit from it. Generally, the thickness of the steel strip produced by the manufacturer is about 0.42mm, because the yield of the steel strip of this thickness is relatively high and the profit is relatively objective. However, in fact, the needs of customers are often diverse. Some customers need thinner steel strips, while others require thicker steel strips. For the manufacturer, if the yield is also low, the higher the scrap rate will be, so the cost will be high, The selling price is also high.

Finally, there is the problem of loss. Any product will lose in the production process. In the process of storage and transportation, the damage rate of those thin 304 stainless steel strips is higher than that of thick steel. For manufacturers, this is also a point to be considered in the cost calculation process, which affects the price.

In general, the price difference of 304 stainless steel strip is mainly due to rolling cost, yield and loss.